Skip to content

Landing Page

Chimney Rebuilds

We can tear down any chimney to the roof or the ground and rebuild it back to code.


“One of the best companies for my fireplace. Their costs are upfront and reasonable. The work is quality work. They clean up after themselves. I have used them for the past 5 years on 3 of my homes. I have nothing negative to say. They even schedule service quickly and easily. Invoices emailed as well as detailed quotes to approve. Thank you Master Services!”

-Jennipher Jess


Usually, you can tell just by looking whether a fireplace is masonry or prefab. Check out our blog post on the Difference Between Masonry and Prefabricated Fireplaces for more information.

People with more traditional tastes tend to prefer the brickwork and aged look of a masonry fireplace. Masonry chimneys are typically found on older homes, and this can mean older stonework. Stone and brick work are susceptible, like most other materials, to wear and tear over time. Chimneys without a Chimney Cap are especially at risk of weathering and damage!

We start the Chimney Rebuild Process by tearing down the chimney chase to the roof due to spalling of the bricks.

The chimney in this picture was a project in Plano. Texas in 2011. It was falling apart and leaking water into the living room!

Once torn down, we replaced the flashing around the base and rebuilt the chimney with a similar brick size and color match the the original chimney. Masters Services Chimney Sweep then puts a chimney cap on the mortar crown, waterproofs the entire chimney, and then seals the flashing to ensure a water tight seal on the entire structure.


Prefabricated, Factory-built fireplaces usually have chimneys extending through the roof. Sometimes these are encased with siding or simulated brick and they usually have a chase cover on top of the chimney.

Prefab fireplaces are extensively factory-tested for safety. However, they have to be installed correctly to be safe. You must be sure that replacement parts are made for your specific fireplace, or risk a house fire. The housing on prefab chimneys is usually a synthetic material like siding, and can be susceptible to wear or rot over time.

Some prefab fireplaces burn wood, some gas, some both. Be sure to only burn the correct fuel in your prefab fireplace box.

Wooden chimney chases commonly rot and leak water, causing mold and damage to attics and sheetrock. Here in Texas where our rainy seasons can mean torrential downpours and thunderstorms, this can mean expensive home repairs for homeowners!

Here is a project we recently completed. The chimney had been blown over in high winds. We rebuilt the chimney and put all the piping back into place. We made a new Stevenson cap on top and painted the chimney.


When we were called out to inspect this chimney it was obvious there was damage and rotting in the siding. When we removed the rotten siding it was replaced burning the chimney rebuild with a much more sturdy hardi-board and painted.

Get A Quote

    What service are you interested in?

    Please provide any additional information or requests:

    Better Business Bureau Logo
    Call Now