Skip to content

Chimney Rebuilds

Masters Services Certified Chimney Professional can tear down any chimney to the roof or the ground and rebuild it back to code. References available upon request.

Masonry Chimney Chases

We start by tearing down the chimney chase to the roof due to spalling of the bricks. This chimney was falling apart and was leaking water into the living room. Once torn down we replaced the flashing around the base and rebuilt the chimney with a similar brick size and color match the the original chimney. This chimney was done in Plano, Texas in 2011. Masters Services Chimney Sweep then puts a chimney cap on the mortar crown, waterproofs the entire chimney, and then seals the flashing to ensure a water tight seal on the entire structure.

Rebuild Brick Chimney


Prefabricated Chimney Chases

Wooden chimney chases are commonly rotting and leaking water causing mold and damage to attics and sheetrock. Here is a project on the left we recently completed. The chimney had been blown over in high winds. We rebuilt the chimney and put all the piping back into place. We made a new Stevenson cap on top and painted the chimney.

Rebuild Chimney

Above is a framed in prefab chimney built with brick that started to lean from roof up. We tore down the brick and rebuilt in James Hardie products.


 

Chimney Rebuilds Completed

Rebuild before & after

When we were called out to inspect this chimney it was obvious there was damage and rotting in the siding. When we removed the rotten siding it was replaced buring the chimney rebuild with a much more sturdy hardi-board and painted.

Call Now